Sharp AL-2060 appendix Entering Your Name and FAX Number, 2ENTRY Mode, 3OWN Passcode SET

INITIAL SETTINGS

ENTERING YOUR NAME AND FAX NUMBER

You can view all of the items in the menu display by pressing the [MENU] key, then using the [] key () or Note [] key () to scroll through the function list. Pressing the [OK] key chooses the displayed function.

Procedures for inputting various items (name, telephone number, date, etc.) are given as follows.

To have your name and fax number printed at the top of every page you transmit, program them by pressing the operation panel keys as shown below.

●If you enter an incorrect character or number, follow these steps to correct the mistake.

1.Press the [] key () or [] key () to move the cursor to the character immediately following the incorrect character.

2.Press the [CLEAR] key ( ).The character in front of the cursor is deleted.

3.Enter the correct character.

Use the following procedure to enter your name and fax number:				2
1	Press the [MENU] key.	5	Enter your fax number with the
			numeric keys.

1,2,3,

1,2,3,

SP. FUNC

Enter your own fax number (maximum 20 digits) by pressing the Numeric keys.

To insert a "+", press the [ ] key.

2 Press the [] key () or [] key ( ) until "2:ENTRY MODE" appears, and then press the [OK] key.

Selection

"2:ENTRY MODE"

6 Press the [OK] key.

"ENTER NAME" will appear in the display.

1,2,3,

1,2,3,

SP. FUNC

3 Press the [] key () or [] key () until "3:OWN PASSCODE SET" appears, and then press the [OK] key.

Selection

"3:OWN PASSCODE SET"

4 Press the [] key () or [] key () to select "1:SET" and press the [OK] key.

Selection

"1:SET"

7 Enter your name with the numeric keys.

Enter your name by

pressing the appropriate

Numeric keys as shown

on the left. Press each

key repeatedly until the

desired letter appears in

the display (maximum of 40 characters).

To enter a space, press the [1] key twice.

21