2DATE Format | Sharp AL-2060 specs

INITIAL SETTINGS

To change the order of display of the date, follow the steps below:

1 Press the [MENU] key.

1,2,3,

SP. FUNC

6 Press the [OK] key.

1,2,3,

SP. FUNC

2 Press the [] key () or [] key () until "4:USER PROGRAM" appears, and then press the [OK] key.

Selection

"4:USER PROGRAM"

3 Press the [] key () or [] key () until "21:DATE&TIME FORMAT" appears, and then press the [OK] key.

Selection

"21:DATE&TIME FORMAT"

4 Press the [] key () or [] key () until "2:DATE FORMAT" appears, and then press the [OK] key.

Selection

"2:DATE FORMAT"

5 Press the [] key () or [] key () to select the display order.

	The selections are as
	follows:
1,2,3,	1:MMDDYYYY
1,2,3,
SP. FUNC	2:DDMMYYYY
	2:DDMMYYYY
	3:YYYYMMDD

This selection does not affect the order of

Note the date that appears in "2:DATE & TIME SET" in step 4 on page 22.

The date in this step always appears in the format "YYYYMMDD".

7 Press the [MENU] key.

Press the [MENU] key to exit.

1,2,3,

SP. FUNC

Page 28

Image 28

Sharp AL-2060 appendix 2DATE Format, Press the key or key to select the display order

Contents

AL-2060 Telecommunication Line cable Important safety information Page Table of Contents Appendix Selecting the transmission mode p.26 Quick Reference Guide Dialing methods Sending a fax Sending a fax to multiple destinations Broadcasting p.69 Selecting the reception modeStoring a fax job while another job is in progress Cancel a timer transmission job Set the default resolution for fax transmissionList of FAX Functions Set the date and time in the machine Enable the remote reception function Enable the polling security functionSelect the condition for printing reports on received faxes Set the volume of the ringer Set this function for pbx settingSEC Select 12-hour or 24-hour format for the time set Machine Time Perform polling transmission once Perform polling transmission repeatedlyPoll another fax machine Sequentially poll multiple fax machines Selecting Settings for the Function Press the Mode Select key to select fax modeSelect a setting or enter information Press the Menu key Connections Connecting the Telephone Line CordFor other countries Final Preparations Connecting Other DevicesOnline Manual on the CD-ROM Part Names Following illustration shows the part names of the AL-2060 Press this key to select the mode of reception Press this key to adjust the contrast before sending faxesPress this key to switch between upper and lower case Shows various messages during fax operation and programming Press this key to configure a user program This lights up when an original is placed in the RspfThis lights up when the power save function is activated Using the Arrow Keys Adjusting the Beep Volume 18RINGER Volume Adjusting the Ringing Volume4USER Program 17BEEP Length Selections are asFollows 13SEC 19BEEPER Volume Press the key or key to set the alarm volumeTo turn off the alarm, select 1OFF Press the OK key Press the Menu key FAX Setup HOW to Enter CharactersFollowing characters can be entered with the numeric keys Characters that can be entered Entering Your Name and FAX Number 2ENTRY Mode3OWN Passcode SET Setting the Date and Time When 24-hour format is selected, do not perform this step2DATE&TIME SET Enter Date 2008- 2008/01/02 21DATE&TIME Format Press the Menu key Press the OK key1TIME Format 2DATE Format Press the key or key to select the display order 5DAY Light Saving Daylight Saving Time SettingPress the key or key to select 1ON or 2OFF Memory transmission the Memory indicator is lit Selecting the Transmission ModeDirect transmission the Memory indicator is off Selecting the Reception Mode Press the key or key Until 4USER Program appearsThen press the OK key # of Rings Auto Selecting the Reception Paper Size # of Rings Manual Setting the Number of Recall Times When the line is busy8RECALL Times Busy Enter the number of recall times 00 to 9RECALL Times ERR When a communication error occursEnter the number of recall times 0 to Setting the Recall Interval 10RECALL INT. BusyPress the numeric keys to select the recall interval Enter the recall interval 01 to 11RECALL INT. ERR Enter the recall interval 00 to Use the following procedure to set the index function Setting the Index Function20INDEX Print 3RESO. Priority Setting Resolution PrioritySelections are as follows 1STANDARD 2FINE Setting UP the Machine for USE with a PC Modem 15FAX Signal RCV 14REMOTE Reception Using the Remote Reception FunctionTurning on Remote Reception 13FAX Remote Number Setting a Fax Remote NumberPress a numeric key to enter the Fax Remote Number PBX Setting PBX setting22PBX Setting Press the Clear ALL key Storing Numbers for Automatic Dialing Storing numbers1FAX Number Enter the fax number with the numeric keys Press the key or key to select a Chain Dial setting Enter the name of the destination with the numeric keys 2CLEAR 3GROUP KEY Storing Numbers Under Group KeysEnter the numbers that you wish to store in the Group Key Enter a name for the Group Key with the numeric keys Return to to program another Group key Enter the numbers that you wish to delete To exit, press the key or key to select 2END2END Deleting numbers from Group Keys Using the Machine with AN Answering Machine 6A.M. Mode Press the Menu keyQuiet Detect Time 1QUIET Detect Time If Quiet Detect Time is not working properly Answering Machine Backup2AUTO Receive Size and Weight When using the RspfWhen using the document glass Originals Suitable for Faxing Unsuitable Originals Setting the Original Sending Originals Gently close the Rspf MarkPress the # key Optional Transmission Settings Original Size1DOC. Glass Size Press the key or key to select the original size Resolution Contrast Press the Cover Sheet key Press the OK key Cover Sheet1COVER Sheet SET Message Function 2TX Message SETPress the key or key to select a message If you do not wish to add a message, select 1NO Message Press the 2-SIDED TX key until the desired setting appears TWO-SIDED Original Transmission FunctionPlace the originals in the Rspf Follow these steps to fax a two-sided original Dialing and Transmitting Direct Keypad DialingRapid KEY Dialing Speed Dialing Normal Dialing Using the Speaker KEY To adjust the volume, press the left and key or keyChain Dialing Dial the fax number of the receiving machine Redialing Using the Search KEYPress the REDIAL/PAUSE key Press the Start key If the Memory Becomes Full While Scanning AN Original Canceling Deleting a Stored FAX JOB3MEMORY Status Using Auto Mode Using MAN. ModeUsing A.M. Mode Receiving Faxes TWO-SIDED Reception Optional Reception SettingsSided RX Press the Menu key 16RCV Reduce Receive ReducePaper When Using Manual Sending and Receiving Memory Substitute Reception into Memory 0RX Data Transfer Data Transfer2FAX Number 1YES 1DATA TransferFollow these steps to use the fax transfer function Adjust the resolution and/or contrast settings if desired Transmission Reservation Press the Broadcast key Press the OK key BroadcastingTransmission will begin Broadcasting using a Group key Press the appropriate Group key. Transmission will begin 8POLLING Mode You want to poll using one of the following methodsPolling Polling 9SERIAL Poll Mode Serial Polling 7MEMORY Poll Mode Setting up polling transmissionPolling Transmission Memory Polling Adding a original to polling memory Deleting originals from polling memory Press the key or key To select 1ON 1ON11SECURITY Select Fax machines you want Programming/deleting passcode numbers 4PASSCODE # ModeSelect 2CLEAR and press the OK key Timer Operations 1TIMER ModePress the Menu key Enter the time at which transmission Press the key or key to select 1SET Canceling a Timer Transmission JOB 5ANTI Junk FAX Anti Junk FAX1ANTI Junk Select To store junk fax numbers, use the following procedure If you wish to storeAnother fax number Return to step To clear junk fax numbers, use the following procedure If you wish to store another fax number, return to step Operation in COPY, PRINTER, SCANNER, and FAX Modes Printing OUT Reports You can print out a list of group dialing numbers Passcode List Fax numbers designated as Anti Junk Fax numbers Use the following procedure to print out reports Currently activated User Program settingsPress the Report key Press the OK key 6AUTO Listing Activity Report Auto ListingPress the key or key to select 1ON and press the OK key Printing Transaction Reports 7PRINT Selection Troubleshooting → Replace the TD cartridge Audible Signals Messages and SignalsDisplay Messages Specifications Index Reception mode Transmission modeReports Storing numbers Index by Purpose Sending originals AL-2060

INITIAL SETTINGS

1 Press the [MENU] key.

6 Press the [OK] key.

"4:USER PROGRAM"

"21:DATE&TIME FORMAT"

"2:DATE FORMAT"

5 Press the [] key () or [] key () to select the display order.

The selections are as

follows:

3:YYYYMMDD

7 Press the [MENU] key.