Sharp AL-2060 appendix 0RX Data Transfer, 2FAX Number

DATA TRANSFER

If there is a problem with the machine, you can use the Data Transfer function to have received faxes read into memory and then sent to a different fax machine for printing.

This function is used when you cannot print received faxes, for example when the machine runs out of toner, or a misfeed occurs.

To use this function, the fax number of the transfer destination machine must be programmed.

Your fax machine

Enter the fax number of the fax machine your want to transfer the data to.

[Preparation]

		Receiving fax machine
		beep
FW. RX DATA
1=YES	2=NO
Select data transfer mode		Transferred faxes
		are printed

Note	Transfer is only possible when a received fax is being held in memory because printing was not possible. In this
	case, "0:RX DATA TRANSFER" will appear in the display.

Follow these steps to program the fax number of the transfer destination machine:

1 Press the [MENU] key.

1,2,3,

1,2,3,

SP. FUNC

2 Press the [] key () or [] key ( ) until "0:RX DATA TRANSFER" appears, and then press the [OK] key.

Selection

"0:RX DATA TRANSFER"

3 Press the [] key () or [] key () until "2:FAX NUMBER" appears, and then press the [OK] key.

Selection

"2:FAX NUMBER"

4 Enter the fax number of the transfer destination machine with the numeric keys and press the [OK] key.

Enter the transferring fax number (maximum 40 digits) by pressing the numeric keys.

5 Enter the name of the transfer destination with the numeric keys and press the [OK] key.

66