Sharp AL-2060 appendix Printing Transaction Reports, 7PRINT Selection

TROUBLESHOOTING

PRINTING TRANSACTION REPORTS

The machine can be set to print a transaction report after each transmission, reception, and/or error. The printing condition can be selected separately for three types of transaction reports: "TRANSMISSION LIST", "BROADCAST LIST", and "RECEPTION LIST". For each type of report, select one of the following printing conditions:

"ALWAYS PRINTS" ...After each transmission, reception, or error. "ERROR ONLY".........After an error only.

"NEVER PRINTS" ......Never prints.

Note Part of the transmitted fax can be printed on the transaction report (IMAGE MEM. PRINT setting).

To set the machine to print transaction reports, follow these steps:

1 Press the [MENU] key.

1,2,3,

1,2,3,

SP. FUNC

2 Press the [] key () or [] key () until "4:USER PROGRAM" appears, and then press the [OK] key.

Selection

"4:USER PROGRAM"

3 Press the [] key () or [] key () until "7:PRINT SELECTION" appears, and then press the [OK] key.

Selection

"7:PRINT SELECTION"

4 Press the [] key () or [] key () to select the type of transaction report and press the [OK] key.

The selections are as follows:

1:TRANSMISSION

1,2,3, 1,2,3,

SP. FUNC2:BROADCAST 3:RECEPTION 4:IMAGE MEM. PRINT

5 Press the [] key () or [] key () to select the printing condition and press the [OK] key.

	The selections are as
	follows:
1,2,3,	1:ALWAYS PRINTS
1,2,3,	2:ERROR ONLY
SP. FUNC
	3:NEVER PRINTS

6 Press the [MENU] key.

Press the [MENU] key to exit.

1,2,3,

1,2,3,

SP. FUNC

6

4:IMAGE MEM. PRINT" can be enabled to have part of the transmitted fax printed on the transaction report.

87