Sharp AR-C260, AR-C260M 3 Loadtray. transparency film into the bypass, 2 Touch the [OK] key on the SPECIAL MODES screen

SPECIAL MODES

Transparency film with insert sheets

When copying onto transparency film, blank insert sheets can be placed between transparent sheets. Example: Inserting insert sheets between transparencies

Originals (1-sided)

4

3

2

1

Originals (2-sided)

1	3
	4
	2

For two-sided originals, this is only possible when using a reversing automatic document feeder.

4

3

2

1

Insert sheets

During color copying, output takes place in reverse order.

●Insert sheets cannot be copied on in any mode.

●This mode can be selected only in the 1-sided to 1-

sided and 2-sided to 1-sided modes.

●A multiple number of copies cannot be selected in this mode.

●Transparency film must be fed from the bypass tray. ●Insert sheets must be the same size (8-1/2" x 11" or 8-1/2" x 11"R (A4 or A4R)) as the transparency film. ●For best results, use SHARP recommended

transparency film.

●When using the "transparency film with insert sheets" function for color copying, load the original pages in reverse order to have the output produced in forward order.

Before performing the following procedure, touch the [OUTPUT] key in the main screen of Copy mode to display the OUTPUT settings screen (page 5-5), and then touch the [LEFT TRAY] key* to set the output tray to the left tray*. * If the optional saddle stitch finisher is installed, touch the [FINISHER TRAY] key to set the output tray to the finisher tray.

1 Touch the [TRANSPARENCY INSERTS] key on the SPECIAL MODES screen.

5 Touch the [SPEED MODE] or [QUALITY MODE] for the transparency film.

MARGIN SHIFT E

The [TRANSPARENCY

PLEASE SELECT TRANSPARENCY MODE. SPEED MODE is for fast

TRANSPARENCY INSERTS

CO

INSERTS] key is highlighted to indicate that the function is turned on, and the transparency inserts icon ( , etc.) appears in the upper left of the screen.

				printing.
			OK
				QUALITY MODE is for a
	SPEED MODE
				high quarity image.
	QUALITY MODE
EXTRA SIZE		BASIC SETTING

2 Touch the [OK] key on the SPECIAL MODES screen.

Return to the main screen of copy mode.

3 Loadtray. transparency film into the bypass

Remove any paper already in the bypass tray before loading the transparency film. (To load paper in the bypass tray, see pages 2-4and 2-5.)

4 Touch the [PAPER SELECT] key and select the transparency film loaded in the bypass tray.

8½x11	AUTO	Touch	the
		[TRANSPARENCY] key.
	EXPOSURE

PLAIN
HEAVY PAPER	PAPER SELECT
TRANSPARENCY	100%
ENVELOPE	COPY RATIO

6 Touch the [PAPER SELECT] key again and select the paper (8-1/2" x 11" (A4) or 8-1/2" x 11"R (A4R) size) to be used for the inserts.

	READY TO COPY.								0
						INTERRUPT
1.		8½x11	PLAIN		8½x11
								AUTO
							EXPOSURE
2.		8½x14	RECYCLED		PLAIN
3.		11x17	COLOR	HEAVY PAPER
							PAPER SELECT
4.		8½x11R	PLAIN	TRANSPARENCY			100%

ENVELOPE COPY RATIO

About the steps that follow

If a reversing automatic document feeder is being used, see pages 5-2and 5-3.If the document glass is being used, see pages 5-7and 5-8.

To cancel the TRANSPARENCY INSERTS function, touch the [TRANSPARENCY INSERTS] key again on the SPECIAL MODES screen.

NOTE

When the copy job is finished, remove any transparencies that remain in the bypass tray.

6-8