REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically or manually as described in this section.

Automatic selection (auto image)

The reduction or enlargement ratio will be selected automatically based on the original size and the selected paper size.

1 Place the original in the document feeder tray (when a reversing automatic document feeder is installed) or on the document glass. (page 4-6)

The detected original size will be displayed.

NOTE

Automatic ratio adjustment can only be used for the following original and paper sizes. It cannot be used

ORIGINAL 8½x11

 

PLAIN

 

8½x11

8½x11

 

DUPLEX

 

11x17

 

8½x14

AUTO IMAGE

AUTO

EXPOSURE

11x17 PAPER SELECT

129%

COPY RATIO

The [AUTO IMAGE] key

0will be highlighted and the best reduction or enlargement ratio for the original size and the selected paper size will

be selected and displayed in the copy ratio display.

for other sizes. However, in the case of non-standard original and paper sizes, the sizes can be entered to make automatic ratio adjustment possible for those sizes. (page 6-24)

Original sizes:11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8- 1/2" x 11"R, 5-1/2" x 8-1/2" (A3, B4, A4, A4R, B5, B5R, A5)

Paper size: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/ 2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", (A3, B4, A4, A4R, B5, A5)

2 Touch the [PAPER SELECT] key and then select the desired paper size.

NOTE

If the message "ROTATE ORIGINAL FROM TO

" is displayed, change the orientation of the original as indicated in the message. When the message above is displayed, copying can be done without changing the orientation, but the image will not fit the paper correctly.

4 Use the numeric keys to set the desired number of copies.

Up to 999 can be set.

If you are only making a single copy, the copy can be made with the

1.

8½x11

RECYCLED

2.

11x17

PLAIN

3.

8½x14

PLAIN

When touching the desired paper size

selection key, the selected key will be highlighted and the paper selection screen will close.

copy number display showing "0".

Use the [C] (clear) key to cancel an entry if a mistake has been made.

NOTE

If paper of the desired size is not loaded in any tray, load paper of the required size in a paper tray or the bypass tray.

3 Touch the [AUTO IMAGE] key.

PAPER

1

COPY

AUTO IMAGE

5 Press the [COLOR COPY START ( )] or [BLACK COPY START ()] key.

If you placed the original on the document glass, set the output to "Sort", and pressed the [BLACK COPY START] key, you must touch the [READ- END] key after all pages of the original have been scanned. (Step 7 on page 5-8)

To cancel the auto image mode, touch the [AUTO IMAGE] key again to clear the highlighted display. (Step 3)

5-12