Sharp AR-C260, AR-C260M 1 Touch the [INTERRUPT] key, 5 Resume the interrupted copy job, copies and then press the [COLOR COPY, START ( )] or [BLACK COPY START ()]key

INTERRUPTING A COPY RUN

INTERRUPT can be used to temporarily stop a long copy run so that another copy job can be run. It is not possible to interrupt an automatic two-sided copy job.

1 Touch the [INTERRUPT] key.

3 Make all other desired settings such as exposure, paper size and number of

INTERRUPT	0
ORIGINAL 8½x11	AUTO
	EXPOSURE
PLAIN	AUTO 8½x11
5½x8½
	PAPER SELECT
X	100%
	OPY RATIO

CANCEL	0
ORIGINAL 8½x11	AUTO
	EXPOSURE
PLAIN	AUTO 8½x11
5½x8½
	PAPER SELECT
X	100%
	OPY RATIO

If the [INTERRUPT] key

does not appear, interrupt copying is not possible.

When the [INTERRUPT] key is touched in step 1, the [INTERRUPT] touch key will be replaced by the [CANCEL] key as shown in the illustration.

copies and then press the [COLOR COPYSTART ( )] or [BLACK COPY START ()]key.

When making black and white copying using the document glass in the sort mode, replace the original with the next original and press the

[BLACK COPY START]

key. Repeat this

operation until all originals have been scanned. Then, touch the [READ-END] key.

NOTES

●If you touch the [INTERRUPT] key when the account counter function is turned on, the display will prompt you to enter your account number. Enter your account number with the numeric keys. The copies you make will be added to the count of the entered account number.

●If the [INTERRUPT] key is touched while an original is being scanned, the interrupt state will begin after scanning is completed. If the [INTERRUPT] key is touched during copying, the interrupt state will begin after the copy is completed.

●Interrupt copying is not possible during automatic two-sided copying using the optional duplex module/2 x 500 sheet paper drawer. In addition, automatic two-sided copying is not possible during interrupt copying.

2 Place the original for the interrupt copy job in the document feeder (if a reversing automatic document feeder is installed) or on the document glass (page 4-6).

If a black and white copy job is being interrupted to run another black and

white copy job, the

number of originals that

can be copied in the

interrupt job is 35.

(based on text original

(A) on page 5-4)

PLACE NEXT ORIGINAL. PRESS [START].

WHEN FINISHED, PRESS [READ-END].

READ-END

4 When the interrupt copy job is finished, touch the [CANCEL] key to turn off the interrupt copy state.

CANCEL0

ORIGINAL 8½x11 AUTO

EXPOSURE

PLAIN

5½x8½ AUTO 8½x11

PAPER SELECT

X100%

OPY RATIO

5 Resume the interrupted copy job.

If a color copy job was interrupted, replace the originals that have not yet been copied and resume copying.

If a black and white copy job was interrupted, replace the originals that have not yet been copied and press the [BLACK COPY START] key to resume copying.

6-28