Sharp AR-C260, AR-C260M or [BLACK COPY START, NOTE, )] key, JOB PROGRAM MEMORY, 1 Press the [#/P] key, 1 Press the [#/P] key, 4 Touch the [DELETE] key

JOB PROGRAM MEMORY

Recalling a job program

1 Press the [#/P] key.	3 Set the number of copies as needed and
	press the [COLOR COPY START (			)]
	or [BLACK COPY START (	)] key.
	Copying will		start	with
	the	settings	of	the
	recalled job program.

2 Touch the desired storage register number key to recall the job from memory.

JOB PROGRAMS

PRESS PROGRAM NUMBER.

RECALL

When a number key is touched, the selection screen will be closed and the stored job program will be recalled. A number for which no job program has been

stored cannot be selected.

Deleting a stored job program

1 Press the [#/P] key.

2 Touch the [STORE/DELETE] key to obtain the storage register screen.

NUMBER.

RECALLSTORE/DELETE

3 Select a storage register number of the program to be deleted.

		If a number key for which
	EXIT
		no	job program	has
		been stored is selected,
		the screen will change to
		the screen of step 4 on
		the	previous page	(for
STORE/DELETE

storing a job program).

4 Touch the [DELETE] key.
											6
					When the [DELETE] key
					is touched, the screen in
		A JOB PROGRAM HAS BEEN ALREADY STORED.
		STORE ANOTHER PROGRAM?			step 3 will return and the
					program will be deleted.
		CANCEL	DELETE	STORE
					If the [CANCEL] key is
	REC LL			STORE/DELETE
					touched,		the	screen		in
					step 3 will return but the
					program		will		not	be
					deleted.		If	no other
					programs		are		to	be
					deleted, touch the [EXIT]
					key	on	the		screen
					displayed in step 3 to
					exit	the	job		program
					mode.

NOTE

If overwriting of programmed copy settings has been prohibited in the key operator programs, you will not be able to clear a job program. (See page 15 of the key operator's guide.)

6-27