Sharp AR-C260, AR-C260M NOTE, NOTE, )] key, NORMAL COPYING, number of copies, or [BLACK COPY START, 9 Press the [COLOR COPY START, 8 Use the numeric keys to set the desired

NORMAL COPYING7 Select the desired output mode (see page

5-5).

2-SIDED COPY

OUTPUT

The sort mode is the default mode.

To select the group

mode, touch the [OUTPUT] key, then touch the [GROUP] key on the output setting screen, and then touch the [OK] key on the setting screen.

8 Use the numeric keys to set the desired
number of copies.
Up to 999 can be set.
If you are only making a
single	copy,		the copy
can be made with the
copy	number display
showing "0". Use the [C]
(clear) key to cancel an
entry if a mistake has
been made.
NOTE					5
If color copies are made with the output set to "Sort",
only one set of copies will be made even if a
selection is made for a greater number of copies.
(See page 5-5 "Copy output (sort and group)").
When "Group" is selected, the selected number of
copies will be made (See next page 5-4 "Copy mode
output restrictions").
9 Press the [COLOR COPY START (				)]
or [BLACK COPY START (		)] key.
If the [C] key is pressed
while originals are being
scanned,		scanning		will
stop.	If	copying		had
already started, copying
and scanning			will stop
after	the	original		in
progress is output to the
original exit			area.	In
these	cases		the copy

quantity will be reset to "0".

NOTE

The 1-sided to 1-sided copying mode is set as the default in the initial settings. If the default setting has not been changed using the "Initial status settings" program (key operator program), steps 3 to 5 on page 5-2can be omitted.

5-3