TROUBLESHOOTING

Whenever the machine stops or operation is not possible, check the operation panel display for messages. In most cases, these messages will give sufficient information to return the machine to an operating condition. In cases where this information is not enough, check the list below for more information. This section describes problems concerning copier features. For troubleshooting specific problems related to the printer or network scanner features, see the separate manuals provided for these features. For problems related to other peripheral devices, see page 2-24.

Problem

 

Check

Solution or cause

 

 

 

 

Machine does

not

Are the [START] keys indicators off?

If the indicators are not on, the machine may

operate.

 

 

 

be warming up. Warm-up should be

 

 

 

 

 

completed in 99 seconds or less.

 

 

 

Copies are too dark

Is the original image too dark or too light?

Select an appropriate resolution setting for

or too light.

 

 

 

the original being copied and adjust the copy

 

 

 

 

 

exposure. (See page 5-10)

 

 

 

 

 

 

 

 

 

 

Is the exposure mode set to "AUTO"?

The exposure level for "AUTO" can be

 

 

 

 

 

adjusted using the "Exposure adjustment"

 

 

 

 

 

key operator program. Contact your key

 

 

 

 

 

operator. (See page 13 of the key operator's

 

 

 

 

 

guide.)

 

 

 

 

 

 

 

 

 

 

An appropriate resolution setting for the

Change the resolution setting to "AUTO" or

 

 

 

 

original has not been selected.

manually select an appropriate resolution

 

 

 

 

 

setting. (See page 5-10)

 

 

 

Text is not clear on a

An appropriate resolution setting for the

Change the resolution setting to "TEXT".

copy.

 

 

 

original has not been selected.

 

 

 

 

Moiré appears on a

An appropriate resolution setting for the

Change the resolution setting to "PRINTED

copy of a magazine,

original has not been selected.

PHOTO".

catalogue,

or other

 

 

printed material.

 

 

 

 

 

 

 

 

Text

overlaying

a

An appropriate resolution setting for the

Change the resolution setting to "MAP".

photo is not clear on

original has not been selected.

 

a copy of a map,

 

 

magazine

or other

 

 

printed material.

 

 

 

 

 

 

Smudges appear on

Document glass or document cover dirty?

Clean regularly. (See page 7-3)

copies.

 

 

 

 

 

 

Original smudged or blotchy?

Use a clean original.

 

 

 

 

 

Image

cannot

be

Is the auto paper select or auto image

Rotation copy functions only if the machine

rotated.

 

 

function set?

is either in the auto paper select mode or in

 

 

 

 

 

the auto image mode. (See page 4-7.)

 

 

 

 

 

Part

of

original

Is the original positioned correctly?

Set the original properly. (page 4-6)

image is not copied.

 

 

Is the copy ratio proper for the original and

Use the auto image function to select the

 

 

 

 

paper sizes?

appropriate copy ratio based on the original

 

 

 

 

 

and copy sizes. (See page 5-12.)

 

 

 

 

Blank copies

 

Is the original placed correctly?

When using the document glass, place the

 

 

 

 

 

original face down.

 

 

 

 

 

When using the reversing automatic

 

 

 

 

 

document feeder, place original face up.

 

 

 

 

 

 

7-4