Sharp AR-C260, AR-C260M (for network scanner), 1 Press the [CUSTOM SETTINGS] key, More information on setting procedures

CUSTOM SETTINGS
The items that can be set with the custom settings are shown below.
● Total count ...................................	The number of pages processed by the machine and optional equipment
	can be displayed. (See page 2-14.)
● Display contrast ...........................	Used to adjust the contrast of the operation panel display. (See page 2-14.)
● List print*1 .....................................	Used to print a list of machine settings. (See page 2-14.)
● Clock adjust ...................................	Used to set the date and time of the built-in clock of the printer. (See this page.)
● Tray settings ................................	The paper type, paper size and automatic tray switching can be set for each
	tray. Automatic tray switching allows feeding to switch between trays
	loaded with the same type and size of paper. If one tray runs out of paper
	during printing, printing will continue from the other tray. (See page 2-14)
For the detailed descriptions and use of the settings listed below, see the Operation manual
(for network scanner).
● Address control*2 .........................	Used to enter destination e-mail addresses, user indexes and sender	2
	information for systems that have the network scanning function.
● Keyboard select*2.........................	When using the network scanner, you can switch the arrangement of the
	letter keys in the display keyboard used for storing and editing destinations
	in the English character entry screen.
● Key operator program..................	These are programs that are used by the key operator (administrator of the
	machine) to configure machine settings. A key appears for these settings in
	the custom settings menu screen. For information on these settings, see
	the key operator's guide.
*1 List print can be used in a system where the printer and network scanner function can be used.
*2 These settings can be configured in a system where the network scanner function is available.

Operation procedure common to all custom settings

1 Press the [CUSTOM SETTINGS] key.

The custom setting

menu screen will appear.

More information on setting procedures

In the following type of screen, a setting is turned on when a checkmark ( ) appears next to the key. A checkmark will appear or disappear by alternate touches of the checkmark box. In the following screen, tray 1 can be used in both the print and copy modes. Tray 2 can only be used in the copy mode.

CUSTOM		SETTINGS
						OK
TRAY SETTINGS
			TYPE / SIZE	PRINT	COPY
							1/2
	TRAY	1	PLAIN /

2 Touch the key of the desired item to display its setting screen.

The settings accessed by touching the [CLOCK] key are explained here.

CUSTOM SETTINGS			EXIT
TOTAL COUNT	DISPLAY	LIST PRINT	CLOCK
	CONTRAST

TRAY SETTINGS	ADDRESS
	CONTROL
KEYBOARD	KEY OPERATOR PROGRAMS
SELECT

Detailed descriptions for program settings start on the next page.

The procedure for setting the clock is shown below as an example.

CUSTOM SETTINGS
CLOCK ADJUST							OK
	YEAR	MONTH	DAY	HOUR	MINUTE
	2000	01	01	00		00

TRAY 2 PLAIN /

2-13