Sharp AR-C260, AR-C260M Message display, Exposure display, Paper size display, Copy ratio display, Paper select display, Copy quantity display, Original feed display

PART NAMES AND FUNCTIONS (The Reversing Automatic Document Feeder)

Touch Panel (main screen of copy mode)

The main screen of copy mode shows messages and keys necessary for copying and settings that can be selected. Touch a key to make a selection. The main screen of the copy mode will be displayed when the [COPY] key is pressed.*

	READY TO COPY.							0
					INTERRUPT
SPECIAL MODES			ORIGINAL		8½x11		AUTO
						EXPOSURE
				PLAIN
2-SIDED COPY				5½x8½		AUTO 8½x11
						PAPER SELECT
		8½x11
	OUTPUT	DUPLEX				100%
		8½x11				COPY RATIO
		11x17

*Except when the custom settings screen is displayed.

The screen at left shows the machine with the reversing automatic document feeder, the duplex module/2 x 500 sheet paper drawer, and the duplex bypass/inverter unit installed.

The image will vary depending on the equipment installed.

Message display

Basic status messages are displayed here.

[INTERRUPT] key display area

When interrupt copy is available, the [INTERRUPT] key will be displayed here. When an interrupt copy job is being run, a [CANCEL] key will be displayed here to be used for canceling the interrupt copy job.

Copy quantity display

Displays the selected number of copies before the [START] key is pressed or the number of remaining copies after the [START] key is pressed. A single copy can be made when "0" displayed.

[2-SIDED COPY] key (page 5-6,5-9)

Touch to display the duplex copy mode setting screen.

[OUTPUT] key (page 5-3,5-8)

Touch to select sort, group, and staple sort.

[SPECIAL MODES] key (page 6-2)

Touch to display the special modes selection screen.

Original feed display

This lights steadily when an original is placed on the original table of the reversing automatic document feeder. When "Stream feeding mode" in the key operator programs is turned on, the display blinks during the waiting period (about 5 seconds) for placement of the next original. (See page 10 of the key operator's guide.)

Paper size display

The display shows the location of the paper trays, the size of the paper in the trays and the approximate amount of paper loaded in each tray. The approximate amount of paper in a tray is

indicated by .

Original size display

Displays the original size only when an original is placed for copying.

Exposure display

Displays the icon of the selected resolution and the exposure scale.

[EXPOSURE] key (page 5-10)

Use this key to adjust the copy exposure.

Paper select display

Displays the selected paper size. When the auto paper select mode has been selected, "AUTO" will be displayed.

[PAPER SELECT] key (page 5-2,5-7)

Use this key to select the paper size.

Copy ratio display

Displays the selected copy ratio.

[COPY RATIO] key (page 5-13)

Use this key to select the copy ratio.

4-4