•The indication “WORKING...” shown on the side of the receiving Organizer at the beginning or end of the data transmission means that the memory has begun to be freed up automatically.
2. Transferring Data between Organizers
The single data entry or entire data in a mode (TEL,
•When an error occurs, “I/O DEVICE ERROR!” is displayed on the receiving or transferring Organizer, or on both ones.
1.Press the desired mode key, or recall a listing to be transferred on the transferring Organizer.
•To transfer all the data by mode, press the mode key to display the entry prompt. To transfer the data by entry, recall the desired listing.
•Turn both of the Organizers off first before connecting them with the optional cable.
| 5 |
|
|
| 4 |
| 4 |
| 1 |
|
|
| 1 |
|
|
| R |
| R |
| E |
| E |
W | D | W | D |
Q | S | Q | S |
LINK | LINK | ||
A | X | A | X |
COMPUTER | Z | COMPUTER | Z |
2.Press 2nd 
OPTION on both the Organizers.
The following menus are displayed.
3.Press 2 on the receiving Organizer to select RECV (RECEIVE).
<UNIT TO UNIT> 1 SEND 4 BACKUP
CAPS 2 RECV 5 RESTORE 3 VERIFY
<UNIT TO UNIT>
CAPS RECEIVING MODE
2nd | 2 |
4. Press 1 on the transferring Organizer to select SEND.
30
