Loading the Imaging Film
Loading the Imaging Film
Your fax uses a roll of imaging film to create printed text and images. The print head in the fax applies heat to the imaging film to transfer ink to the paper. Follow the steps below to load or replace the film.
The initial starter roll of imaging film included with your fax can print about 30
When replacing the film, use a roll of Sharp FO- 6CR imaging film. One roll can print about 150
1 Remove any paper from the paper tray
and open the operation panel (press ➊).
2
If you are loading the imaging film for |
|
the first time, go to Step 4. | 1 |
2 Remove the used film and empty spool.
3 Remove the two green gears from the
spools.
DO NOT DISCARD THE TWO GREEN GEARS!
14