Sharp FO-P600 operation manual Redial, Automatic redialling

Models: FO-P600

1 83
Download 83 pages 57.17 Kb
Page 37
Image 37

Sending a Fax by Automatic Dialling

Redial

You can automatically redial the last number dialled. This procedure can be used to send a fax or make a phone call.

1 If you are sending a fax, load the document(s).

RESOLUTION/

If desired, press RECEPTION MODE to set the

 

resolution and/or contrast.

READY TO SEND

2 Press once. <REDIAL> appears in the display, followed by the last

number dialled. Make sure the number that appears is the number you wish to dial.

3 If you are sending a fax, press START/MEMORY . Dialling and transmission begins.

If you are making a phone call, lift the handset. Dialling begins.

Sending

Faxes

2.

 

Automatic redialling

If you use automatic dialling (including Direct Keypad Dialling) to send a fax and the line is busy, the fax machine will automatically redial the number. The fax machine will make two redial attempts at an interval of five minutes. During this time, RECALLING will appear in the display, followed by a two-digit number assigned to the fax job. You will not be able to dial any other locations while the message appears.

To stop automatic redialling, press STOP .

Under certain conditions (for example if a person answers the call on a telephone), automatic redialling may stop before two redialling attempts are made.

35

Page 37
Image 37
Sharp FO-P600 operation manual Redial, Automatic redialling