Loading Printing Paper

Loading Printing Paper

You can load up to 50 sheets of A4-size, 60 - 80 g/m2 paper in the paper tray (at room temperature; maximum stack height should not be higher than the line on the tray).

1 Fan the paper, and then tap the edge against a flat surface to even the stack.

2 Insert the stack of paper into the tray, PRINT SIDE DOWN.

If paper remains in the tray, take it out and combine it into a single stack with the new paper.

Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality.

GENTLY LOAD PAPER INTO THE PAPER TRAY.

DO NOT FORCE IT DOWN INTO THE FEED SLOT.

The stack should not

cover this

Correct

Incorrect

line

 

 

Note: Do not use paper that has already been printed on, or paper that is curled.

Note: If at any time the display shows the alternating messages at right, check the printing paper. If the tray is empty, add paper. If there is paper in the tray, take it out and then reinsert it.

When you are finished, press START/MEMORY .

ADD PAPER &

PRESS START KEY

16

Page 18
Image 18
Sharp FO-P600 operation manual Loading Printing Paper