Optional Reception Settings
2 If you hear a soft fax tone, wait until your fax responds (the extension phone will go dead), then hang up.
Beep
Phone goes dead
3 If the fax doesn't respond, or if the other party first talks to you and then
wants to send a fax, press 5 once and | twice on the extension |
phone (only on a tone dial phone). This signals the fax to begin reception. Hang up.
•The above step is necessary if you have set the Fax Signal Receive setting (see below) to NO.
•Your fax will not accept the signal to begin reception (5**) if a document is loaded in its feeder.
•In New Zealand, not all standard telephones and answering machines will respond to incoming ringing when connected to the extension socket of the equipment.
Optional Reception Settings
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after answering a call on your fax or an extension phone. If you use a computer fax modem to send documents on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents from the computer fax modem. Follow the steps below to change the setting.
1 | Press FUNCTION once and | once. | Display: | |
| ||||
|
|
|
| OPTION SETTING |
2 | Press | once and | 5 times. | FAX SIGNAL RX |
|
|
|
| |
Receiving | Faxes |
3. |
|
43
