Sending a Fax by Automatic Dialling

Sending a fax by Direct Keypad Dialling

You can also enter a full number with the number keys and then press the

START/MEMORY key to begin dialling. You can use this method to dial a full number when you don't need to speak to the other party before faxing.

1 Load the document(s).

RESOLUTION/

If desired, press RECEPTION MODE to set the

resolution and/or contrast.

READY TO SEND

2

3

Enter the number of the receiving machine by pressing the number keys.

If a pause is required between any of the digits to access a special service or an outside line, press FUNCTION . The pause will appear as a hyphen (two seconds per pause). Several pauses can be entered in a row.

Check the display. If the number of the receiving machine shown is

correct, press START/MEMORY .

If the number is not correct, press

STOP

to backspace and clear one digit

 

at a time, and then re-enter the correct digit(s).

34

Page 36
Image 36
Sharp FO-P600 operation manual Sending a fax by Direct Keypad Dialling, Load the documents