Using TEL Mode

2 If you hear a soft fax tone, wait until your fax responds (the extension phone will go dead), then hang up.

Beep

Phone goes dead

3 If the fax doesn't respond, or if the other party first talks to you and then

wants to send a fax, press 5 once and

twice on the extension

phone (only on a tone dial phone). This signals the fax to begin reception. Hang up.

The above step is necessary if you have set the Fax Signal Receive setting (see below) to NO.

Your fax will not accept the signal to begin reception (5**) if a document is loaded in its feeder.

In New Zealand, not all standard telephones and answering machines will respond to incoming ringing when connected to the extension socket of the equipment.

Putting a call on hold

To put the other party on hold during a phone conversation, press HOLD .

When this is done, they cannot hear you. You can put the handset back in the cradle without breaking the connection. When you are ready to speak with the other party again, pick up the handset. If you did not put the handset back in

the cradle, press HOLD again to resume conversation.

46

Page 48
Image 48
Sharp FO-P610/FO-P630 operation manual Putting a call on hold