Sending a Fax by Automatic Dialling

Sending a fax by Direct Keypad Dialling

You can also enter a full number with the number keys and then press the

START/MEMORY key to begin dialling. You can use this method to dial a full number when you don't need to speak to the other party before faxing.

1 Load the document(s).

If desired, press RESOLUTION to set the resolution and/or contrast.

READY TO SEND

2 Enter the number of the receiving machine by pressing the number keys.

If a pause is required between any of the digits to access a special service or an outside line, press FUNCTION . The pause will appear as a hyphen (two seconds per pause). Several pauses can be entered in a row.

3 Check the display. If the number of the receiving machine shown is

correct, press START/MEMORY .

If the number is not correct, press STOP to backspace and clear one digit

at a time, and then re-enter the correct digit(s).

Sending

Faxes

2.

 

35

Page 37
Image 37
Sharp FO-P610/FO-P630 operation manual Sending a fax by Direct Keypad Dialling, Load the documents