Loading Printing Paper

Loading Printing Paper

You can load up to 50 sheets of A4-size, 60 - 80 g/m2 paper in the paper tray (at room temperature; maximum stack height should not be higher than the line on the tray).

1 Fan the paper, and then tap the edge

against a flat surface to even the stack. Make sure the stack edges are even.

2 Insert the stack of paper into the tray, PRINT SIDE DOWN.

If paper remains in the tray, take it out and combine it into a single stack with the new paper.

Be sure to load the paper so that printing takes place on the print side of the paper. Printing on the reverse side may result in poor print quality.

GENTLY LOAD PAPER INTO THE PAPER TRAY.

DO NOT FORCE IT DOWN INTO THE FEED SLOT.

The stack should not

be higher

Correct

Incorrect

than this line

 

 

Note: Do not use paper that has already been printed on, or paper that is curled.

Note: If at any time the display shows the

 

 

ADD PAPER &

alternating messages at right, check the printing

 

 

paper. If the tray is empty, add paper. If there is

 

 

 

 

 

 

paper in the tray, take it out and then reinsert it.

When you are finished, press START/MEMORY .

PRESS START KEY

 

 

 

1. Installation

17

Page 19
Image 19
Sharp FO-P610/FO-P630 operation manual Loading Printing Paper, Than this line