Loading the Imaging Film
4
Remove the new roll of imaging film from its packaging.
•Cut the band that holds the rolls together.
5
Insert the green gears.
Make sure the gears fit into the slots in the ends of the rolls.
1 slot
2 slots
6 Insert the film into the print |
| Ensure that both | |
Fit ends of rolls | gears are properly | ||
compartment. | seated by pushing | ||
onto hubs | |||
| down lightly on the | ||
|
| ||
|
| gears. |
Thick roll to rear
7 Rotate the front gear as shown until the film is taut.
8 Close the operation panel (press down
on both sides to make sure it clicks into place).
16