Watching TV
ANALOG/DTV/RADIO buttons
Use the following buttons on the remote control to operate the menu.
ANALOG: Press to switch to analogue mode. After switching from DTV, radio or external input mode to analogue mode, the TV jumps to the most recently viewed analogue channel.
DTV: Press to switch to DTV mode. After switching from analogue, radio or external input mode to DTV mode, the TV jumps to the most recently viewed DTV channel.
RADIO: Press to switch to radio mode. After switching from analogue, DTV or external input mode to radio mode, the TV jumps to the most recently tuned radio channel.
When you watch the TV for the first time
When the TV powers on for the fi rst time after purchase, perform the auto installation.
Analogue TV
You can run the auto installation to set channels automatically.
1To watch the analogue TV, select “Auto Installation” from Setup menu. (See page 21.)
2After setting the channels, you can select a channel using CH r/s or
DTV
When the TV accesses to DTV mode for the fi rst time, you need to run the auto search. To scan all available services in your area, follow the procedures below.
1To watch DTV broadcasts, select “Auto Search” from Installation menu. (See page 35.)
2After setting the channels, you can select a channel using CH r/s or
18
