Sharp LC-46PD7X operation manual Input Label, Image position

Useful adjustment settings

Input Label

You can assign each input source a label you like.

1Press TV/VIDEO to select the desired input source.

2Press MENU and the MENU screen displays.

3Press c/d to select “Setup”.

4Press a/b to select “Input Label”, and then press ENTER.

5Press a/b/c/d to select each character of the new name for the input source, and then press ENTER.

			DVD
A B C D E					F	G	H	I	J CLEAR
K	L	M N O			P	Q	R	S	T BACK
U	V W		X	Y	Z	+	– .		_
0	1	2	3	4	5	6	7	8	9	END

(Example)

6Repeat until the name is fully spelt out.

•The name can be 6 characters or less.

•When you want to set an input source name of less than 6 characters, select “END”, then press ENTER to exit from the labelling menu.

INPUT SOURCE

TV

DTV

INPUT1

INPUT2

DVD

INPUT4

INPUT5

(Example)

NOTE

• You cannot change labels if the input source is TV or DTV.

Image position

For adjusting a picture's horizontal and vertical position.

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select “Position”, and then press ENTER.

4Press a/b to select “H-Pos.” or “V-Pos.”.

H-Pos.	[	0]	a10	b10
V-Pos.	[	0]	a20	b20
Reset

Selected item	Description
H-Pos.	Centres the image by moving it to the left
	or right.
V-Pos.	Centres the image by moving it up or
	down.

5Press c/d to adjust the item to your desired position.

NOTE

•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press

ENTER.

•Adjustments are stored separately according to input source.

42