Using external equipment
Displaying an external equipment image
Explanation here is for the setting when connecting DVD player to INPUT1 terminal.
NOTE
•Each time TV/VIDEO is pressed, the input source toggles.
•If the image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.
•Refer to your external equipment operation manual for the signal type.
Displaying a DVD image (Example)
1To watch a DVD image, select “INPUT1” using TV/VIDEO on the remote control unit or TV/ VIDEO on the TV.
INPUT SOURCE
TV
DTV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
2Select the desired signal type on “Input Select” in the “Option” menu.
For INPUT1 signal
MENU [Option ... Input Select]
Auto
COMPONENT
VIDEO
The setting is stored and can be selected.
Input Select
Selecting input source
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on the TV
TV/VIDEO allows you to choose from the available input sources.
1Press TV/VIDEO on the remote control unit or on the TV.
2Press TV/VIDEO on the remote control unit or on the TV to select the input source.
•The image from the selected source automatically displays.
•You can also select the input source by pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
1Press MENU and the MENU screen displays.
2Press c/d to select “Option”.
3Press a/b to select “Input Select”, and then press ENTER.
4Press a/b to select a signal type you want to set, and then press ENTER.
Input source | Selectable item |
|
|
INPUT 1 | Auto, COMPONENT, VIDEO |
|
|
INPUT 2 | Auto, COMPONENT, VIDEO |
|
|
INPUT 5 | Auto, DIGITAL, ANALOGUE |
|
|
NOTE
•If no (colour) image displays, try to change the other signal type.
•Check the operation manual of the external equipment for the signal type.
•When the signal type is set to “Auto”, the input terminal where cable is connected is automatically selected.
•When the signal type is set to “Auto” and multiple video signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1/INPUT 2: COMPONENTs VIDEO
•When the signal type for “INPUT5” is set to “DIGITAL” or “ANALOGUE”, a “PC” or “AV” signal is automatically detected.
49
