Basic adjustment settings (Digital)
Installation
The fi rst time the receiver is powered on, “Programme list is empty” will display on the screen. Under the main menu, select “Installation” and enter into the sub- menu.
Auto Search
You can automatically search for and download TV channels.
1Press DTV MENU to display the DTV menu screen.
2Press a/b to select “Setup”, and then press
ENTER.
3Press a/b to select “Installation”, and then press ENTER.
If you have already set the password, enter it here. If not, enter the factory preset password “1234”.
• See page 39 for setting a password.
4Press a/b to select “Auto Search”, and then press ENTER.
5Press c/d to select “Yes”, and then press
ENTER.
6Auto search starts.
• Programme auto search
You do not need to do anything during the auto search.
NOTE
•Once the DTV signal is scanned, the channel number and programme name will be shown on the programme list.
•The indicator operates concurrently with scanning channels and shows the progress made.
Manual Adjust
You can set some channel items manually.
1Repeat steps 1 to 3 in Auto Search.
2Press a/bto select “Manual Adjust”, and then press ENTER.
3Press
• Channel settings apply to channels
4Press a/bto select the desired menu item, and make sure the correct frequency is selected.
Channel No : 3
Frequency : 778000KHz
Signal Level : 
94%
Quality : |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 100% |
SNR : |
|
|
|
|
|
|
|
| 25dB | ||||||||||||
|
|
|
|
|
|
| Start Scan | ||||||||||||||
5Press a/b to select “Start Scan”, and then press ENTER.
NOTE
•If a signal locks in, “Start Scan” will change to “Get Channel Success”. Then you can press EXIT to leave the installation page and watch a programme or continue scanning for other channels. Anytime you watch a DTV channel and want to know the “Signal Level”, “Quality” or “SNR”, enter into this page.
•If a signal does not lock in, “Start Scan” will show “Timeout Error”. You can scan the signal again, or refer to the “Signal Level” and “Quality” for aligning the direction of the antenna to get the signal.
•Signal Level: The signal power or intensity from the broadcasted frequency.
Quality: The clean level of the signal from the broadcasted frequency.
SNR: The rate of signal and noise to radiated frequency.
35
