Power Control, No Signal Off, No Operation Off | Sharp LC-46PD7X

Basic adjustment settings (Analogue/Digital)

Power Control

Power Control setting allows you to save energy.

No Signal Off

When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Power Control”.

• Power control menu displays.

3Press a/b to select “No Signal Off”, and then press ENTER.

4Press c/d to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

•“Disable” is factory preset value.

•When a TV programme ﬁ nishes, this function may not operate.

No Operation Off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Power Control”.

• Power control menu displays.

3Press a/b to select “No Operation Off”, and then press ENTER.

4Press c/d to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

31

Image 33

Sharp LC-46PD7X operation manual Power Control setting allows you to save energy, No Signal Off, No Operation Off

Contents

LC-46PD7X LC-52PD7X Page Dear Sharp customer Contents Trademarks Contents Precautions when transporting the TV Important Safety Precautions Supplied accessories Using the remote control unit PreparationInserting the batteries Preparation Attaching the stand Bundling the cables Setting the TVInsert the cable clamp in the hole on the TV as shown TV rear view Removing the stand Setting the TV on the wall Connecting to the AC outlet Connecting to an antennaBasic connection Simple operations for watching a TV programme Connecting a DVD player Connecting a VCR, game console or camcorderWhen using component cable commercially available When using Hdmi cable commercially available When using DVI cable commercially available Connecting a PC Part names TV FrontTV/VIDEO button Part names TV Rear When using the remote control unit, point it at the TV Remote control unit Turning off the power Turning on the powerWatching TV Simple button operations for changing channels Using Flashback a on the remote control unit Using MPX on the remote control unitWatching TV Using Mute e on the remote control unit Changing the volumePress e again within 30 minutes to cancel the mute Mutes the current sound output Press e When you watch the TV for the ﬁrst time ANALOG/DTV/RADIO buttonsAnalogue TV Basic adjustment settings Menu operation buttonsOn-Screen Display Menu items TV/DTV/INPUT1-2 Basic adjustment settingsMenu items HDMI/DVI List of menu items to help you with operations Programme setup Auto installationBasic adjustment settings Analogue Auto search Search tuning Fine tuningColour system See Sound system See Labelling channels Colour systemLabelling menu Sound system Broadcasting system Setting the child lock SortSkipping channels Erase programme menus Basic adjustment settings Analogue Erase Programme AV Mode selection OPC Optical Picture Control settingBasic adjustment settings Analogue/Digital Adjustment items Picture adjustments Advanced Colour temperature Quick ShootBlack 3D-Y/C Film Mode Basic adjustment settings Analogue/Digital MonochromeRange of OPC Max Using Surround on the remote control unit Audio adjustmentPress Surround to switch the Surround function on and off Using Surround on the menu screen Power Control setting allows you to save energy Power ControlNo Signal Off No Operation Off DTV input mode menu items Basic adjustment settings DigitalSelecting DTV mode List of DTV menu items to help you with operations Programme Guide Basic adjustment settings DigitalFavourite Programme List Info Favourite & Lock Programme ListParental Rate Press a/b to select Favourite & Lock, and then Enter Manual Adjust InstallationAuto Search Auto search starts Video Setup Reset DataQuick Search Press a/b to select Quick Search, and then press Enter Time Setup Using Digital Audio OutputDigital Output Multilingual Update Service only Plate Setup Information Plate SetupInformation Press a/b to select Information, and then press Enter Password setting for child lock for TV/DTV input mode Useful adjustment settingsSetting a password Resetting the password Useful adjustment settings Input Signal PC input mode onlyInput Skip Press Menu to exit Fine Sync. adjustment PC input mode only Auto Sync. adjustment PC input mode onlyPhase Pos Adjustments are stored separately according to input source Input LabelImage position WSS signal 43 screen Mode Panorama Wide Screen Signalling WSSPicture aspect ratio Press c/d to select On or Off, and then press Enter Reset Standby Mode Mode menu Wide mode for TV/AV input modeManual Selection Auto Selection You can select the screen size Wide mode for PC input modePress Wide or a/b to select a desired item on the menu Normal Cinema Full Dot by Dot Audio Only Hdmi SetupDNR Digital Noise Reduction Press a/b to select the desired item, and then press Enter Language setting for on-screen display Colour system settingIdentiﬁcation Displaying an external equipment image Using external equipmentDisplaying a DVD image Example Input Select Teletext function Useful features Displaying Subtitle Useful featuresDisplaying Subpages Time display Teletext language setting Press Freeze again to cancel the functionFreezing images Troubleshooting DTV TroubleshootingProblem Possible Solution Appendix RS-232C port speciﬁcations Communication procedureAppendix PC Control of the TV Commands PC compatibility chartResolution Horizontal Vertical Response code format Speciﬁcations Optional accessoriesModel Part name Model number Dimensional drawings LC-46PD7X, LC-52PD7XUnit mm Password is Clearing the Password Memo Memo Page Printed on post-consumer recycled paper