29
Repeat steps 1 to 3 in Monochrome.
1
Film ModeAutomatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
fi lm frame for high-defi nition picture quality.
Press a/b to select “Film Mode”, and then
press ENTER.
2
Press c/d to select “On”, and then press
ENTER.
3
NOTE
• Film Mode is not selectable depending on the input signal
type.
Basic adjustment settings (Analogue/Digital)
Press MENU and the MENU screen displays.
1
Press c/d to select “Picture”.
2
Press a/b to select “Advanced”, and then
press ENTER.
3
MonochromeFor viewing images in monochrome.
Press a/b to select “Monochrome”, and then
press ENTER.
4
Press c/d to select “On”, and then press
ENTER.
5
Range of OPCThe brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of +16 and a minimum of
-16.
Repeat steps 1 to 3 in Monochrome.
1
Press a/b to select “Range of OPC”, and
then press ENTER.
2
Press a/b to select “Max.” or “Min.”, and
then adjust the item to the desired position.
3
Selected item
Max.
Min.
Description
-15 through +16
-16 through +15
NOTE
• This function is available only when the OPC setting is set
to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
46PD7X_en_e.indd 2946PD7X_en_e.indd 29 2007/01/12 16:31:502007/01/12 16:31:50