INPUT2
INPUT2 audio
INPUT2(INPUT/OUTPUT) 2
R - AUDIO - L
VIDEO
Video
■ INPUT2: Input or output can be selected for INPUT2. (*1) 56 INPUT2 Select This setting cannot be switched when INPUT2 is currently being displayed.
| Terminal type | Compatible signals |
|
|
|
Video | RCA | NTSC (3.58/4.43), PAL, SECAM (*2) |
|
|
|
When this is set to “Output”, video signals input from the INPUT1 video input terminal are output. (*3) An audio signal is output with this setting (i.e. the audio signal corresponding to the video currently being displayed). (*4)
Related topic:
56INPUT2 Select
*1 | “Input” is factory preset value. |
*2 | “Auto” (automatic color system detection) is factory preset value. 57 Color System |
*3 | Outputs video from INPUT1, regardless of the currently displayed signal. |
*4 | If the “INPUT2 Select” is set to “Output”, audio output is as follows. |
Example 1 |
|
| Example 2 |
|
|
Input Selection | 31 | : INPUT1 | Input Selection | 31 | : INPUT3 |
“Input Select” | 54 | : AV | “Input Select” | 54 | : RGB |
INPUT2 video output: Video from INPUT1 | INPUT2 video output: Video from INPUT1 | ||||
INPUT2 audio output: Audio from INPUT1 | INPUT2 audio output: Audio from INPUT3 | ||||
US 14