PC Operation (Continued)
IDSL······ The parameter of this command sets the ID number indicating the monitor subject to the next command.
Example: |
|
|
| ||||
IDSL0002 | ← The next command is for the monitor with ID number=2. | ||||||
WAIT |
| ← Searching for monitor with ID number=2. |
| ||||
OK |
|
|
| 002 | ← Found monitor with ID number=2 |
| |
|
|
| |||||
|
|
|
| ||||
VOLM0030 | ← Set volume of monitor with ID number=2 to 30 |
| |||||
WAIT |
| ← Processing |
| ||||
OK |
|
|
| 002 | ← OK response from monitor with ID number=2 | The IDSL command is | |
|
| ||||||
|
| ||||||
VOLM0020 | ← Set volume to 20 | ||||||
effective only once, for the | |||||||
OK |
|
|
| 001 | ← The volume of the monitor with ID number=1 | ||
|
|
| immediately succeeding | ||||
|
| ||||||
|
|
|
|
|
| ||
(the one directly connected to the PC) is set to 20.
command.
IDLK······ The parameter of this command sets the ID number indicating the monitor subject to all subsequent commands.
Example: |
|
|
| |||
IDLK0002 | ← Following commands are for the monitor whose ID number is “2”. | |||||
WAIT |
| ← Searching for monitor with ID number=2. |
| |||
OK |
|
|
| 002 | ← Found monitor with ID number=2 |
|
|
|
| ||||
|
|
|
| |||
VOLM0030 | ← Set volume of monitor with ID number=2 to 30 | The IDLK command | ||||
WAIT |
| ← Processing | ||||
| remains effective until it is | |||||
OK |
|
|
| 002 |
| canceled, or power is shut |
|
|
| ||||
|
|
| ||||
VOLM0020 | ← Set volume of monitor with ID number=2 to 20 | off. | ||||
WAIT |
|
|
| |||
OK |
|
|
| 002 | ← Canceling ID number setting |
|
|
|
| ||||
|
|
| ||||
IDLK0000 |
| |||||
WAIT |
| ← Canceling IDLK |
| |||
OK |
|
|
| 002 | ← Cancelation complete |
|
|
|
| ||||
|
|
| ||||
VOLM0010 |
|
| ||||
OK |
|
|
| 001 | ← The volume of the monitor with ID number=1 (the one directly connected | |
|
| |||||
|
| |||||
to the PC) is set to 10.
IDCK······ Provides screen display of the ID number currently assigned to a monitor, and the ID number currently set for IDLK (if any).
Example: |
|
|
(After executing IDLK0002) |
| |
IDCK0000 | ← (Parameter has no meaning) | |
ID:001 | IDLK:002 | ← Returned response. The ID number is also displayed on the |
|
| monitor screen. |
IDCK000+ | ← Repeater control | |
WAIT |
| (If a command is used with repeater control, ID designation using |
ID:001 | IDLK:002 | IDSL or IDLK is canceled.) |
ID:002 | IDLK:002 |
|
ID:003 | IDLK:002 |
|
ID:004 | IDLK:002 |
|
Operation PC
Continued on the next page.