Menu screen explanation
"Menu screen example (partial)
|
|
|
|
|
Power control | Setup | Option |
| |
|
| Control Lock |
|
|
|
| Input Select | [AV] |
|
|
| Position |
|
|
|
|
|
| |
|
|
|
|
|
|
| Picture Flip | [Normal] |
|
|
| Language |
|
|
|
| [English]� | ||
|
| Input 2 Select | [Input]� | |
|
| ID No. Setting | ||
|
| Enlarge | [Off] |
|
|
| Panel Protection Cover | [Detached] | |
Item displayed in yellow
»This indicates item currently selected.
»Press ENTER to go to the adjustment screen for this item.
Item in brackets
»This shows the current setting for the item.
Items displayed in white
»This indicates that an item can be selected.
Basic
MENU [Setup···Picture Flip]
Set Picture Direction
Normal
Mirror
Upside Down
Rotate
: Select/ RETURN : Back | MENU : Exit |
|
|
Item displayed with gray characters
»These items cannot be selected.
∗There are various reasons why items cannot be selected, but the main reasons are as follows:
1.There is no signal.
2.The function is not compatible with the current input signal.
Most picture adjustment options cannot be selected in the following states:
1.When “Underscan” is selected in “Wide Mode”.
2.With a PC (digital) signal.
This shows the remote control buttons which can be used with the currently displayed screen, and their functions.
»Operate by following this operation guide.
Operation
»The menu screen will revert to the normal screen if there is no operation for 1 minute while the menu screen is displayed.
Language setting»The
» Menu options differ between the AV and PC modes, but operating procedures are the same.
NOTE: » The menu item illustrations in this operation manual are for explanation purposes (some are enlarged; others cropped) and may vary slightly from the actual displays.