Remote Control Unit
■Generally the monitor is operated using the remote control unit once main POWER on the back of the monitor has been turned on.
STANDBY/ON
INPUTVOL
RETURN MENU
ENTER
ENLARGE WIDE
LCD MONITOR
INPUT (Input selection)
Press INPUT to display the input selection screen. Press INPUT or use '/" (Cursor control) to select the input mode.
»In INPUT1 or PC mode, the video selected in “Input Select” (page 54) is displayed on the screen.
»INPUT2 can be selected only when it has been set to “Input” in “INPUT2 Select” (see page 56).
INPUT1 
INPUT2 
INPUT3 
PC
VOL (Volume adjustment)
Press
to increase the volume, and
to decrease the volume.
Sound is muted when volume is set to “0”.
Each input terminal has its own volume output setting.
ENLARGE
The display toggles as shown below, based on the setting on the menu screen.
Off 
2 ⋅ 2 
3 ⋅ 3
56 61 Enlarge
WIDE (Screen size selection)
Press WIDE to display the “Wide Mode” menu screen. Press WIDE or use '/" (Cursor control) to select the screen size.
The screen sizes which can be selected vary depending on the type of video signal.
57 62
Operation Basic