Bundling Cables
■Cables and cords connected to the back of the monitor can be bundled using the supplied cable clamp and cable binders. This will prevent stray or disorganized cables at the back of the monitor.
"Rear view
ConnectionInstallation and
To external devices
Cable binder
Wrap the cable binder around the bundle of cables.
Put the thinner end of cable binder through the hole as shown, and tighten appropriately.
Bundle of cables
"With terminal cover closed
Cable binder
Wrap the cable binder around the bundle of cables.
Put the thinner end of cable binder through the hole as shown, and tighten appropriately.
Bundle of cables
To external devices
How to use the supplied terminal cover mounting screws and flat washers
»Use terminal cover mounting screws to firmly fix the terminal cover if difficult to close after bundling the cables.