PC Operation (Continued)
<Response format in Advanced operation >
■Normal response
1Response when no ID number has been set.
|
|
| Carriage return code |
|
|
|
| (0DH, 0AH) | A response is returned when execution of the |
O | K | ↵ |
| |
| pertinent command is finished. | |||
|
|
|
|
2Response when an ID number has been set.
|
| Space (20H) |
|
| Carriage return code | |
|
|
|
|
|
| (0DH, 0AH) |
O K | SPC | 0 | 0 | 1 | ↵ |
|
ID number of
responding monitor
■When a command has not been executed correctly* 1Response when no ID number has been set.
Carriage return code (0DH, 0AH)
E R R ↵
2Response when an ID number has been set.
|
|
| Space (20H) |
|
| Carriage return code | |
|
|
|
|
|
|
| (0DH, 0AH) |
E R | R | SPC | 0 | 0 | 1 | ↵ |
|
ID number
*This is returned when there is no such command, or when the command cannot be used in the current state of the monitor (i.e. video
*If communication has not been established for reasons like a bad connection with the monitor, nothing is returned (not even ERR).
*If no monitor has been assigned the designated ID number (e.g. if the command IDSL0002[X] is issued, but no monitor with ID=002 is found), ERR
XXX[X] is returned.
(ID number at the furthest end)
[Example]
PC | Set 1 | Set 2 | Set 3 |
In the above case
IDSL0004 | |||||
WAIT |
| ||||
ERR |
|
|
| 003 | ←Monitor with ID=3 at the furthest end returns ERR |
|
| ||||
|
|
| |||
Operation PC
Continued on the next page.