Connecting Peripheral Equipment (Continued)
INPUT3
|
|
|
|
|
|
|
|
|
|
| Horizontal | Vertical | INPUT3 audio | ||||||||||||||||||||||||||||||||||||||||||
Input Select: RGB sync signal (H sync) | sync signal (V sync) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT 3 | 3 |
|
|
|
|
|
| |
Y/G | Pb/Cb/B Pr/Cr/R | HD | VD | AUDIO |
ConnectionInstallation and
Input Select:
COMPONENT
■ INPUT3: Either COMPONENT or RGB can be selected for the input video signal. 54 Input Select
COMPONENT | The signal is input with the Y/Pb/Pr (Y/Cb/Cr) terminals. The HD and VD terminals are | |
not used. Video adjustment options on the menu are the AV type. | ||
| ||
| Compatible input range: 480i/576i, 480p/576p, 1080i (50Hz (*4) /60Hz), 720p (60Hz). (*1) | |
|
| |
RGB | The monitor operates using Video (RGB) and Sync (HD/VD) signals, just like a PC | |
| (analog). Supported sync signals are ordinary separate sync (HD/VD) and Sync On | |
| Green. (*2) (*3) | |
| Video adjustment options on the menu are the PC type. | |
| Compatible input range: Conforms to PC (analog). 68 Appendix 1 | |
|
|
Related topic:
54Input Select
*1
*2 Automatic sync signal type detection
*3 Sync signal presence is detected in the order: Separate Sync → Sync On Green. If for some reason
Separate Sync is not input, the system will operate assuming that the signal is a Sync On Green signal (i.e. that the sync signal is contained in the G signal of RGB), and this may result in an unstable image, depending on the video signal.
*4 1080i (50Hz) corresponds to a SMPTE274M signal. (Horizontal frequency is 28.125kHz)