Mounting Options (Continued)

Upper side

Marking A

Marking A

Wall-mount bracket

Attaching wall-mount bracket to LC-M3700 (horizontal mount)

M6 30mm length

2.Attach the wall-mount bracket (with the angle set) to the back of the Wide LCD Monitor.

Make sure all cables and cords are connected and bundled (see page 29).

Attach the terminal cover to the back of the monitor and align the wall-mount screw holes (Marking A: 4 locations) with the holes (4 locations) on the back of the Wide LCD Monitor.

Use the supplied M6 30 mm length screws (4 screws) to securely fasten the wall-mount bracket in place.

Attaching wall-mount bracket to LC-M3710 (vertical mount)

M6 30mm length

Upper side

Mounting the Wide LCD Monitor

Be sure to use 2 people when installing the Wide LCD Monitor to the base bracket.

Caution

• Be sure to perform Steps Å and ı below. Just performing Step Å could result in the display falling off, which is very

 

 

dangerous.

Install the wall-mount bracket attached to the Wide LCD Monitor to the base bracket.

ÅHang the square holes () of the wall-mount bracket on the hooks (page 24) of the base bracket. ı Tighten the wall-mount bracket and base bracket screws. (Be sure to do this.)

Åı

Make sure the hooks are engaged.

Wide LCD

Monitor

Wall

Tighten from the bottom.

M5 screws 8mm length (2 screws)

Base bracket

US 26