Settings and Adjustments (Continued)
Picture Flip
Adjustable range | Normal/Mirror/Upside Down/Rotate |
Default | Normal |
Normal | Normal image |
Mirror | Mirror image |
Upside Down | Upside down image |
Rotate | Rotated image |
|
|
Language |
|
|
|
Function | Selects display language setting. |
Adjustable range | Japanese, English, German, French, Spanish |
Default | English |
|
|
INPUT2 Select |
|
|
|
Function | Selects INPUT2 terminal use. |
Adjustable range | Input/Output |
Default | Input |
Input | Using as Input |
Output | Using as Output |
Note: | (This setting cannot be switched when INPUT2 is currently being displayed.) |
|
|
ID No. Setting |
|
|
|
Function | Assigns ID numbers to monitors connected in a daisy chain (see page 37), using |
| |
Adjustable range | 0 - 255 |
Default | 0 |
Note: | The numbers 1 to 255 are available for ID numbers. |
| (If “0” is set, the system regards this as the state where no ID number is set.) |
| Although numbers up to 255 can be used for monitor IDs, the number of |
| connectable monitors varies depending on the length of |
| installation environment. |
| Use \/to move between digits, and '/" to raise or lower digit values. |
|
|
Enlarge: (see page 61 for details.) | |
|
|
Function | Sets the image enlargement ratio, and the part of the original image to be enlarged. |
Adjustable range | Off/2 ⋅ 2/3 ⋅ 3 |
Default | Off |
↓ (After adjustment) |
|
Adjustable range |
|
(When set to “2 ⋅ 2”) | 1 - 4 |
Default |
|
(When set to “2 ⋅ 2”) | 1 |
Adjustable range |
|
(When set to “3 ⋅ 3”) | 1 - 9 |
Default |
|
(When set to “3 ⋅ 3”) | 1 |
|
|
Panel Protection Cover |
|
|
|
Function | Setting for panel protection cover. Be sure to set this item when using the cover. |
Adjustable range | Attached/Detached |
Default | Detached |
Note: | Set to “Attached” when using the optional panel protection cover (commercially |
| available in the future). |
|
|
US 56