PC Operation
PC connection
1One-to-one connection with a PC ....... Basic operation
Connect with RS-232C cross cable between the PC COM port (RS-232C connector) and the RS- 232C INPUT terminal on the back of monitor.
"Rear view
To RS-232C | | "PC |
INPUT terminal | To COM port |
| RS-232C cross cable | |
2Daisy chain connection from a single PC....... Advanced operation
Connect with RS-232C cross cable between the PC COM port (RS-232C connector) and the RS- 232C INPUT terminal on the back of monitor.
Next, connect RS-232C cross cable to the first monitor’s RS-232C OUTPUT terminal and to second monitor’s RS-232C INPUT terminal. Connect in the same way to the third and subsequent monitors. Up to about 20 monitors can be connected, depending on the length of RS-232C cables and installation environment.
"First monitor | | "Second monitor |
| | | | | | | | | | | | | |
"PC
RS-232C cross cable
RS-232C cross cable
To COM port | To RS-232C |
| INPUT terminal |
| | To RS-232C |
� | | INPUT terminal |
To RS-232C | To RS-232C |
| OUTPUT terminal | OUTPUT terminal |
Communication conditions
■Set the RS-232C communication settings on the PC to match the monitor’s communication settings.
Baud rate: | 9,600 bps | | Stop bit: | 1 bit |
| | | | |
Data length: | 8 bits | | Flow control: | None |
| | | | |
Parity bit: | None | | | |
| | | | |
Operation Basic
Operation PC
37 US
