Sharp PG-B10S Adjust the projected image, Select the INPUT mode, Page, Basic Operation

4. Adjust the projected image

1 Bring the projected image into focus and adjust the projected image size

Focus	Zoom
• Bring the projected	• Adjust the	zoom in
image into focus	projected
using the focus ring.	image size
	using the
	zoom knob.
		zoom out

Page 22	Page 22
2 Adjust the projected image position and the projector angle
Projection position	Angle
• Adjust the	• Adjust the
projected	projector
image position	angle using
using the lens	the HEIGHT
shift lever.	ADJUST
	button.

Basic Operation

Page 25

3 Correct trapezoidal distortion

Correcting trapezoidal distortion using the Keystone Correction.

Page 23

On the projector

On the remote

control

Compresses upper side.

Compresses lower side.

Page 20

5. Select the INPUT mode

Select the “INPUT 1” using the INPUT button on the projector or the INPUT 1 button on the remote control.

On the	On the remote	On-screen display (RGB) On-screen display (Component)
projector	control
• When pressing	on the projector, input mode switches in order of		INPUT 1	INPUT 2	INPUT 3		.
• When using the remote control, press
		/ / to switch the INPUT mode.
						Page 19

-17