Sharp PG-B10S Computer Image Adjustment, Adjusting the Computer Image, Special Modes Special

Computer Image Adjustment

Using the “Fine Sync” menu, you can adjust the computer image, match the computer dis- play mode, and check the input signal.

Adjusting the Computer Image

Special Modes (Special

Mode Settings)

When “Auto Sync” is set to OFF or when vertical stripes or flickering occur in portions of the screen even if “Auto Sync” is set to ON, adjust “Clock”, “Phase”, “H-Pos” or “V-Pos” to obtain the best computer image.

Select the item on the “Fine Sync” menu and adjust the computer image.

Adjusting the menu screen Page 32

Example: “Fine Sync” menu screen for INPUT 1 mode

Ordinarily, the type of input signal is detected and the correct resolution mode is automatically se- lected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu may need to be selected to match the computer display mode.

Select “Special Modes” on the “Fine Sync” menu and the appropriate resolution.

Setting the menu screen Page 34

Example: “Fine Sync” menu screen for INPUT 1 mode

Description of Adjustment Items

Selectable items	Use \ and to
Clock	adjust vertical noise.
Phase	adjust horizontal noise (similar to tracking
	on your VCR).
H-Pos	center the on-screen image by moving it to
	the left or right.
V-Pos	center the on-screen image by moving it up
	or down.

Note

•You can automatically adjust the computer im- age by setting “Auto Sync” on the “Fine Sync” menu or pressing the AUTO SYNC button. See next page for details.

•To reset all adjustment items, select “Reset” and

press .

MenuUsing the

Note

•If your computer displays patterns which repeat every other line (horizontal stripes), flickering may occur which makes the image hard to see.

•When a DVD player or Digital Video is connected, select 480P as the input signal.

•See “Signal Info (Checking the Input Signal)” on the next page for information on the currently se- lected input signal.

-39