Sharp PG-B10S Using the “Options” Menu, Lamp Timer Life Check, ing the Lamp Life Status

Using the “Options” Menu

You can use the “Options” menu to enhance the usage for the projector.

Lamp Timer (Life) (Check-

ing the Lamp Life Status)

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Display the “Options” menu to check the lamp life status.

Checking the menu screen Page 34

Example: “Options” menu screen for INPUT 2 (S-Video) mode

Description of Lamp Life

Lamp usage condition		Remaining lamp life
		100%	5%
Operated exclusively		Approx.	Approx.
in Eco mode ( )		4,000 hours	200 hours
Operated exclusively		Approx.	Approx.
in Standard mode (	)	2,000 hours	100 hours

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center.

•The table above indicates rough estimates in the case of using only in each mode shown. Remain- ing lamp life changes within the range of the val-

ues shown depending on the frequency at which

“Eco Mode” is switched to “” (Eco mode) and “” (Standard mode) (see page 43).

OSD Display (Setting On- screen Display)

This function allows you to turn the on-screen messages on or off.

Select “” (ON) or “” (OFF) in “OSD Display” on the “Options” menu.

Setting the menu screen Page 34

Example: “Options” menu screen for INPUT 2 (S-Video) mode

Description of “OSD Display” Settings

Selectable settings	Description
(ON)	All On-screen Displays are displayed.
(OFF)	INPUT/VOLUME/AV MUTE/FREEZE/
	AUTO SYNC/ENLARGE/ “An invalid
	button has been pressed.” / “All buttons on
	Projector are locked.”* are not displayed.

*Displayed when the STANDBY button is pressed while the keylock function is active.

MenuUsing the

-41