Sharp PG-B10S Menu Items, When using the INPUT 1 mode, When using the INPUT 2 or INPUT 3 mode

Menu Items

The following shows the items that can be set in the projector. “Picture” menu

Main menu Sub menu

Picture	Contrast	− 30		+30
Page 36	Bright	−	30	+30
	Color	−	30	+30
	Tint	−	30	+30
	Sharp	−	30	+30
	Red	−	30	+30
	Blue	−	30	+30
	Reset
	Page 36
	CLR Temp
	Page 36
	Gamma
	Page 37
	sRGB [ON/OFF]
	Page 37
	Signal Type
	Page 38
Note	Memory
	Page 38

5500 K 6500 K 7500 K 8500 K 9300 K 10500 K

Standard

Presentation

Cinema

Game

Auto

RGB

Component

Memory 1 Memory 5 Memory OFF

When using the INPUT 1 mode:

•In the “Picture” menu of INPUT 1, “Color”, “Tint” and “Sharp” are only displayed when “Signal Type” is set to “Component” or set to “Auto” and the input signal is recognized as a component signal.

•In the “Picture” menu of INPUT 1, “sRGB” is only displayed when “Signal Type” is set to “RGB” or set to “Auto” and the input signal is recognized as an RGB signal.

When using the INPUT 2 or INPUT 3 mode:

•There is no “Signal Type” item in the “Picture” menu.

•In the “Picture” menu of INPUT 2 or INPUT 3, “Sharp” is adjustable between –3 and +3.

“Fine Sync” menu

Fine Sync	Clock	−	30	+30
Page 39	Phase	−	15	+15
	H-Pos	−	30	+30
	V-Pos	−	30	+30
	Reset
	Page 39
	Special Modes
	Page 39
	Auto Sync [ON/OFF]
	Page 40
Note	Signal Info
	Page 40

When using the INPUT 1 mode:

•“Fine Sync” menu is only displayed when the projector input is INPUT 1.

-30