Replacing the Air Filter

4Remove the air filter.

Pick the air filter up with your fingers and lift it out of the filter cover.

5Clean the air filter.

Clean the dust off the air filter and cover with a vacuum cleaner extension hose.

6Replace the air filter.

Place the air filter underneath the tabs on the filter cover.

7Replace the filter cover.

Align the tab on the filter cover and place it while pressing the tab to close it (1). Then tighten the user service screw (2) to secure the filter cover.

Note

Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed.

If dust or dirt has collected inside the rear and bottom air filters (not removable), clean the filter with a vacuum cleaner extension hose.

Tab

1

2

User service screw

-62

Page 66
Image 66
Sharp PG-B10S Remove the air filter, Clean the air filter, Replace the air filter, Replace the filter cover