Problems and Solutions

Line error

Problem

Check and remedy

 

 

LINE ERROR appears in

Try the transaction again. If the error persists,

the display and/or a

check the following:

transaction report is printed

 

out with COM. E- and a

 

number from 0 to 1, 2, 3, 4,

 

5, 6, or 7 in the NOTE

 

column.

 

 

Check the hookup. The cord from the TEL. LINE

 

jack to the wall jack should be no longer than six

 

feet.

 

Make sure there are no modem devices sharing

 

the same telephone line.

 

Check with the other party to make sure their fax

 

machine is functioning properly.

 

Have your telephone line checked for line noise.

 

Try connecting your fax to a different telephone

 

line.

 

If the problem still occurs, your fax machine may

 

need service.

 

 

Dialing and transmission problems

Problem

Check and remedy

 

 

No dial tone when you pick

Make sure the handset cord is connected to the

up the handset or press the

correct jack. See Handset in Connections in

SPEAKER key.

Chapter 1.

 

 

Dialing is not possible.

Make sure the power cord is properly plugged

into a power outlet.

 

 

Make sure that the telephone line is properly

 

connected to both the TEL. LINE jack and the

 

wall jack.

 

Make sure that the fax is set to the correct

 

dialing mode for your telephone line. See Option

 

Setting 8 in Chapter 8.

 

 

11.Trouble-

shooting

 

 

107

Page 109
Image 109
Sharp UX-305 operation manual Line error, Dialing and transmission problems