Sharp UX-305 operation manual Reception and copying problems, TEL. SET jack

Problems and Solutions

The power is on, but no	∙ Make sure that the receiving machine has fax
transmission takes place.	paper.
	∙ Make sure that the telephone line cord is
	plugged into the TEL. LINE jack, and not the
	TEL. SET jack.
	∙ If the receiving machine is in manual mode with
	no attendant, reception will not be possible.
	∙ If the receiving machine is not a Sharp model,
	make sure it is G3 compatible.
	∙ Check the display for error messages.
	∙ Pick up the handset and check for a dial tone.
Nothing is printed at the	∙ Make sure that the document for transmission is
receiving end.	placed face down in the feeder.
A distorted image is	∙ Noise on the telephone line may cause
received at the other end.	distortion. Try sending the document again.
	∙ Make a copy of the document on your fax. If the
	copy is also distorted, your fax may need
	service.

Reception and copying problems

Problem	Check and remedy
	∙ Make sure that the reception mode is set to FAX.
The fax machine doesn’t	If you subscribe to a distinctive ring service,
	make sure that the Distinctive Ring function is
receive documents	set to the correct ring pattern. If you do not
automatically.	subscribe to a distinctive ring service, make sure
	that Distinctive Ring is set to OFF SETTING.
	(See Distinctive Ring in Chapter 7.)
The power is on, but no	∙ Make sure that the wall jack is connected to the
reception takes place.	TEL. LINE jack, and not the TEL. SET jack.

108