Sharp UX-305 operation manual Copy Cut-off

Making Copies

Note: If you place a large number of originals in the feeder, the memory may become full before all of them can be scanned (MEMORY IS FULL will appear in the display). If this happens, press the START/MEMORY key to copy the originals which have been scanned, and then repeat the copy procedure for the remaining originals, including the original which was being scanned when the memory became full.

Copy Cut-off

When making a copy of a document that is longer than the printing paper, use the copy cut-off setting to select whether the remaining part of the document will be cut off or printed on a second page. The intial setting is YES (cut off the remainder). To change the setting, follow the steps below.

1 Press these keys:	FUNCTION
	6
The display will show:
COPY CUT-OFF

2 Press 1 to set copy cut-off to YES (the remaining part of the document will not be printed), or 2 to set copy cut-off to NO (the remaining part will be printed on a second page).

The display will show:

YES NO

1 or 2

INITIALIZE FILM

3 Press the STOP key to return to the	STOP
date and time display.

58