Sharp UX-305 operation manual Chain Dialing, Redial

Making Telephone Calls

Comments:

∙While the handset of the fax is lifted (off hook), an extension phone connected directly to the fax cannot be used to speak with the other party.

∙The fax may interrupt a voice call received on an extension phone if the reception mode is set to A.M. and there is a period of silence during the conversation. If you are on a touch-tone phone, you can prevent this by pressing any three keys on the phone immediately after you answer. (Note: Do not enter the code to activate fax reception: 5, *, *.)

Chain Dialing

After lifting the handset, you can dial any combination of Normal Dialing, Rapid Key Dialing and Speed Dialing numbers. For example, if you have stored an area code or an access code for a special service in a Rapid Key, you can press the Rapid Key for that area code or access code, then dial the remainder of the number by pressing a Rapid Key, pressing number keys, or pressing the SPEED DIAL key and entering a two-digit Speed Dial number.

Using the HOLD/SEARCH key

You can use the HOLD/SEARCH key to search for a Rapid Key or Speed Dial number. First search for the number as described in Using the HOLD/SEARCH key in Sending a Fax by Automatic Dialing in Chapter 2, then pick up the handset or press the SPEAKER key. The number will be dialed automatically (do not press the START/MEMORY key).

Redial

The last number called can be redialed by pressing the REDIAL key (it is not necessary to pick up the handset or press the SPEAKER key). When the other party answers, pick up the handset to talk.

60