Sharp XE-A113 instruction manual When not using the take-up spool using as receipt paper

Part1 QUICK START GUIDE	Part2	Part3
5. When not using the take-up spool (using as receipt paper):
• Cut off the excess paper using the edge of the inner cover, and
replace the printer cover. Press the Fkey to make sure the
paper end comes out of the printer cover and clean paper
appears.
If the paper end does not come out, open the printer
cover, and pass the paper end between the paper cutter
and the paper guide of the printer cover, and replace the
cover.

When using the take-up spool (using as journal paper):

•Insert the end of the paper into the slit in the spool. (Press the F key to feed more paper if required.)

•Wind the paper two or three turns around the spool shaft.

•Set the spool on the bearing, and press the Fkey to take up excess slack in the paper.

•Replace the printer cover.

When using a paper roll as journal paper, you must change the printing style. Refer to “Print format” in “Various Function Selection Programming 1” section (Job code 6) for changing the printing style.

11