Sharp XE-A113 instruction manual Job code Selection Entry

Rounding amount printing (A)

Total amount rounding when a transaction is finalized directly by X, Y, cor bkey(B)

Rounding up of the unit digit of amount (C) Rounding down of the unit digit of amount (D)

• Handle C and D as a pair. When you live in Switzerland or Norway, set as shown on the table below for the parameters C and D.

The rounding is performed as follows:

In case C = 0: Unit digit of amount < or = Value of D — rounding down Value of D < or = Unit digit of amount — rounding to 5

In other cases: Unit digit of amount < or = Value of D — rounding down Value of D < Unit digit of amount < Value of C — rounding to 5 Value of C < or = Unit digit of amount — rounding up

Application of rounding (E)

Limit of the least significant digit in entering amount of item (F)

Memory of difference due to rounding (G)

Limit of the least significant digit in entering amount of payment (H)

• When you live in Switzerland or Norway, set as shown on the table below for the parameters E through H.

	CD	E	F	G	H
Switzerland	82	Item & payment	0 and 5 only	No	0 and 5 only
Norway	54	Payment	Arbitrary	Yes	0 only

Job code: 68
* Item:			Selection:	Entry:
	A	Always enter 0.			0
	B	Always enter 0.			0
	C	Temporary EJ printing during a transaction	Disable		0
			Enable*		1
	D	EJ printing and clearing EJ data when	No*		0
		issuing general Z1 report	Yes		1
	E	PGM mode operation records type	Details*		0
			Header information only		1
	F	REG/MGR/VOID modes operation	Details*		0
		records type	Total		1
	G	Compressing printing for EJ data	No (normal size)		0
			Yes (small size)*		1
	H	Action when EJ memory area is full	Continue		0
			Continue and warning (near full warning)*		1
			Lock and warning (with near full warning)		2

58