Sharp XE-A113 1Item Selection Entry, When programming for ror R, always enter 0 for a and B

Function parameters for r, R, X, Y, c, band A(when using as TL key)

To program “0” for all items

*2

*1ABC @ s, X, Y, c, b, ror R A

To program for another key

*2:Press skey for TL key setting.

*1:Item:			Selection:	Entry:
	A	Footer printing*	Allow	1
			Disallow*	0
	B	Amount tendered entry*	Compulsory	1
			Non-compulsory (for X, Yand A)* 0
			Inhibit (for cand b)*	0
	C	Entry digit limit	For X, Y, c, band A	0-8 (default:8)
			For rand R	0-9 (default:9)

*When programming for ror R, always enter 0 for A and B.

Footer printing (only for X, Y, c, band A)

•This programming decides whether or not the machine should print a message at the foot of a receipt when a specified media key is used. With regard to programming method of footer logo message, refer to “Logo messages” section on page 22.

Amount tendered entry (only for X, Y, c, band A)

•You may select amount tendered, compulsory or optional, for the A, Xand Ykeys.

•You may select amount tendered, compulsory or inhibited, for the cand bkeys.

Entry digit limit

•For the X, Y, c, b, rand Rkeys program upper limit entry amount for the tendered amount. For the Akey, program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit

limit is represented by the number of allowable digits for the maximum entry or total amount. When “0” is set, the operation of the corresponding key is prohibited.

Key operation example

018 @

X A

Print

From left, ABC

48